Visionary Mod 2-B Mini-RTU

Features:

• The Model 2-B Mini-RTU is designed for use in medium to large substations. The physical dimensions of this larger unit are 16.25" x 19.00" x 4".

• The 16 pairs of Form C control points provided can handle 10 Amps at 240Vac or 150Vdc. They can be used in Direct Operate or Select-Before-Operate modes.

• Thirty-two digital inputs can be independently configured for Active-HI or Active-LO operation. A separate set of contacts on the input relays can be used for local alarms (lamps or other annunciators) near the RTU.

• Twelve-bit resolution is featured on the 48 single-ended analog inputs, pre-scaled to ± 1 VDC with 0.1% accuracy.

• They can be configured for DNP 3.0, Modbus, PG&E, Landis & Gyr 8979, or CDC Type-1 protocols.

• They can be daisy-chained for additional points on a single communication line.

• The Mod 2-B comes with a free copy of the VisiCal software suite that allows it to be configured, calibrated, scanned, monitored or programmed with drag-and-drop and pushbutton simplicity.
  

Specifications:

• Control Points: 16 Trip & Close pairs

• Control Sequence: Direct or SBO

• Relay Contacts: Form C, 10 Amps at 240Vac or 150Vdc

• Status Inputs: 32

• Status Input Voltage: 12Vdc to 130Vdc

• Input Current: 0.1ma (typical)

• Isolation: Optical

• Overvoltage: phase-to-phase 460V for 10 minutes

• Phase-to-Ground 2000V

• Input Voltage: 12Vdc (4 watts)

• Communication Link: 2 RS-232 Ports

• SWC Certification: ANSI/IEEE C37.90.1 SWC Certified

• Communication Protocols: DNP 3.0, Modbus, PG&E, Landis & Gyr 8979, or CDC Type-1

• Dimensions: 16.25" x 19.00" x 4"