Visionary Micro-RTU/Controller

Features:

• The Micro-RTU/Controller has been designed primarily for use in low point count applications.  Its compact physical dimensions (7.4" x 9.5" x 2.2") make it particularly well suited for pole-top mounting.
  

• The output relays can handle 10 Amps at 250Vac or at 30Vdc and can be used in Select-Before-Operate or Direct Operate modes.
  

• Eight status inputs can be independently configured for Active-HI and/or Active-LO operation.
  

• 2 RS-232 ports and 1 Ethernet port provide the user with greater flexibility in implementing new applications.
  

• It can be configured for DNP 3.0, Modbus, PG&E, Landis & Gyr 8979, or CDC Type-1 protocols.

• The Micro-RTU/Controller comes with a free copy of the VisiCal software suite that allows it to be configured, calibrated, scanned, monitored or programmed with drag-and-drop and pushbutton simplicity.
  

Specifications:

• Control Points: 4 Relays

• Control Sequence: Direct or SBO

• Relay Contacts: Form C, 10 Amps at 250Vac or at 30Vdc.

• Status Inputs: 8

• Status Input Voltage: 12Vdc to 35Vdc

• Input Current: 0.1ma (typical)

• Isolation: Optical

• Overvoltage: phase-to-phase 460V for 10 minutes

• Phase-to-Ground 2000V

• Analog Inputs: 4 single ended user inputs plus zero and full-scale reference voltages

• Range: -1V to +1V, 0V to 5V, or 4-20ma

• Resolution: 12 bits

• Accuracy: 0.1%

• Isolation: Optical, 2000V

• Input Voltage: 12Vac or 12Vdc (4 watts)

• Communication Link: DB25S (RS-232), DB9S (RS-232), RJ45 (Ethernet)

• SWC Certification: ANSI/IEEE C37.90.1 SWC Certified

• Communication Protocols: DNP 3.0, Modbus, PG&E, Landis & Gyr 8979, or CDC Type-1

• Dimensions: 7.4" x 9.5" x 2.2"