Visionary Electronics, Inc.
141 Parker Ave
San Francisco, CA
94118
415-751-8811

Downloads

 

Software updates are available for download. To access the files, you need to obtain a password. Downloads are available for SCADA, PLC and RTU support.

After obtaining a User Name and Password:

1. Select the desired module.
2. Enter your User Name and Password.

RTU Packages

1. Save the VisiCal program and modules to a subdirectory "c:\Program Files\Visionary" on your computer.  
2. Execute the RTU Calibration Software (VisiCal) on your computer to upload the desired module to your RTU.

 

RTU Calibration Software: - Execute the VisiCal program to calibrate and configure any RTU manufactured by Visionary Electronics

VisiCal RTU Calibration Software (ver 1.06p)

RTU Firmware Modules: - The following modules can be used to configure your Visionary Electronics RTU to implement any of the specified protocols or to provide special capabilities.  Save any of them to the "c:\Program Files\Visionary" subdirectory on your computer.  Any modules located in this subdirectory will appear in the "Load New Firmware Module" section of VisiCal.

Mod 1-B CDC (ver 1.06)

Mod 1-B Modbus (ver 1.04)

Mod 1-B DNP 3.0 (ver 1.04)

Mod 1-B PG&E (ver 1.04)

Mod 1-B Transfer-Trip (ver 1.03)

Mod 1-B WindPark (ver 1.03b)

Mod 2-B CDC (ver 1.04b)

Mod 2-B CDC (ver 1.06a)

Mod 2-B DNP 3.0 (ver 1.06a)

Mod 2-B PG&E (ver 1.03h)

Micro-RTU / Controller Card CDC (ver 1.06e)

Micro-RTU / Controller Card DNP 3.0 (ver 1.06w)

Micro-RTU / Controller Card PG&E (ver 1.04c)

Revision History: - The following Document provides a revision history to date of all software and RTU modules available from Visionary Electronics.

Revision History

All of the Above: - The following setup program will install all of the above onto your computer.  We recommend that new VisiCal users download and execute this setup program first.  

All-of-the-Above (vc106q-Setup.exe)

Special: -

enms-gcc120 hm-he-um-ue Setup

SelDataTransfer (ver 1.04)

SelDataStore (ver 1.04)

USATInstaller

emsGateway (ver 1.09)